inno FixIT

Inno FixIT

Bonds in seconds
Very high tensile strength
Solvent free, non abrasive
Resistant to fuels, oils, solvents, weather conditions, temperature changes…
Adheres to almost all materials; metal, plastic, wood, rubber, glass, paper, leather, ceramics, fabrics, …
Combined with FixIT primer bonds even bond-demanding materials like teflon, silicone, polypropylene, polyethylene, neoprene, nitrile, etc.
Can be combined with FixIT activator to accelerate curing and enable application on porous materials

ABOUT THE PRODUCT

Inno FixIT is an excellent adhesive based on cyanoacrylate. It is developed to satisfy the need for fast and flexible adhesive suitable for bonding a wide range of materials. Compounds on glued materials are strong and resilient, and can endure high loads and vibrations of the bonded material. Compounds are resistant to weather conditions, temperature changes, solvents, oils, fuel and moisture. Inno FixIT is usable on almost all materials; metal, plastic, wood, rubber, paper, leather, ceramics, fabrics, glass, … but also, combined with FixIT primer can be used on demanding materials like teflon (PTFE), silicone, polypropylene, polyethylene, neoprene, nitrile, etc.

TEHNICAL INFORMATIONS

Type:	modified cyanoacrylate
Color:	transparent
Viscosity 25 ° C (Brookfield 20rpm):	40-80 mPa.s
Specific weight:	1.05
Flash point:	86°C
Induration time:	5-30 seconds; 80%, 24 hours; 100%
Temperature stability:	-55°C to 82°C
Chemical resistance:	resistant on fuels, oil, solvents and moisture
Weather condition resistence:	exellent
Certificates:	REACH, RoHS
Storage:	dry and cold place, away from light and high temperatures
Expiraton time:	12 months on 5° to 20° C

APPLICATION AND USAGE

Usable on: wood, chipboard, paper, textile, leather, ceramics, acrylic, ABS, aluminum, bakelite, bronze, butylene, cellulose, chloroprene, chrome, delrin, glass, copper, rubber, NBR, neoprene, nitrile, nylon, phenol, polycarbonate, polystyrene, porcelain, hard PVC, inox, steel …
Combined with FixIT primer: teflon (PTFE), silicone, polypropylene, polyethylene, neoprene, nitrile …

Clean and degrease the places that you want to bond

Put the required amount of glue
Press and hold it for 30-60 seconds (see table of materials)
In a case of bonding difficult sticky materials apply FixIT primer before bonding
In a case of bonding porous materials apply FixIT activator on one side of a compound

ADHESION TIME FOR SOME OF THE MATERIALS (SECONDS)

Zinc 10 – 40
Steel 20 – 30
Aluminium 20 – 30
Leather 5-10
Paper 4-8
Ceramics 15-25
Textiles 10 – 20
PVC 3-15ABS 3-15
Oakwood 120-18
Firwood 5-15

DOCUMENTS

inno FixIT Informacije o proizvodu