skip to Main Content
+385 (0)31 297-356

inno FixIT HT

inno FixIT HT

  • High temperature resistant glue
  • Very high tensile strength
  • Solvent free, non abrasive
  • Resistant to fuels, oils, solvents, weather conditions, temperature changes…
  • Adheres to almost all materials; metal, plastic, wood, rubber, glass, paper, leather, ceramics, fabrics, …
  • Combined with FixIT primer bonds even bond-demanding materials like teflon, silicone, polypropylene, polyethylene, neoprene, nitrile, etc.
  • Can be combined with FixIT activator to accelerate curing and enable application on porous materials


Inno FixIT HT is an excellent adhesive based on cyanoacrylate. It is developed to satisfy the need for fast and flexible adhesive suitable for bonding a wide range of materials. Iti s, also, specially developed as a high temperature resistant adhesive. Compounds on glued materials are strong and resilient, and can endure big loads and vibrations of the bonded material. Compounds are resistant to weather conditions, temperature changes, solvents, oils, fuel and moisture. Inno FixIT HT is usable on almost all materials; metal, plastic, wood, rubber, paper, leather, ceramics, fabrics, glass, … but also, combined with FixIT primer can be used on demanding materials like teflon (PTFE), silicone, polypropylene, polyethylene, neoprene, nitrile, etc.


Type: modified cyanoacrylate
Color: transparent
Viscosity 25°C (Brookfield 20rpm): >40-90 mPa.s
Specific weight: 1.7
Induration time: 5-30 seconds; 80%, 24 hours; 100%
Temperature stability: -40°C to 120°C
Chemical resistance: resistant on fuels, oil, solvents and moisture
Weather condition resistence: exellent
Certificates: REACH, RoHS
Storage: dry and cold place, away from light and high temperatures
Expiraton time: 12 months on 5° to 20° C
Flash point: >87°C


  • Usable on: wood, chipboard, paper, textile, leather, ceramics, acrylic, ABS, aluminum, bakelite, bronze, butylene, cellulose, chloroprene, chrome, delrin, glass, copper, rubber, NBR, neoprene, nitrile, nylon, phenol, polycarbonate, polystyrene, porcelain, hard PVC, inox, steel …
  • Combined with FixIT primer: teflon (PTFE), silicone, polypropylene, polyethylene, neoprene, nitrile …

Clean and degrease the places that you want to bond

  1. Put the required amount of glue
  2. Press and hold it for 30-60 seconds (see table of materials)
  3. In a case of bonding difficult sticky materials apply FixIT primer before bonding
  4. In a case of bonding porous materials apply FixIT activator on one side of a compound

Zinc 20 – 50
Steel 10 – 25
Aluminium 5 – 15
Leather 10 – 20
Paper 15 – 25
Fabrics 15 – 25
PVC 10 – 25
ABS 15 – 35
Oakwood 50 -130
Firwood 20 – 40


inno FixIT HT Informacije o proizvodu

inno FixIT HT STL


This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top